June 15, 2016 0 Comments

make your motorcycle more visible at night

Riding a bike during the day means dealing with numerous hazards, such as distracted drivers and pure traffic volume. Night riding trades a few of these hazards for a whole host of new ones. You may not have to deal with many other motorists on a lonely back road after midnight, but there is a much higher probability that any car you pass has an intoxicated or sleepy driver. You also run a higher risk of meeting deer and other wildlife on the road in the nighttime.

The best way to ride safely at night is to increase your sportbike’s visibility. Having a better view of the road ahead will help you identify and prepare for potential hazards. And the gear that makes it easier for you to see also makes it easier for you to be seen. Let’s take a look at some ways to make yourself and your sportbike easier to see at night.

increase motorcycle visibility with brighter lights

Simply put, the most effective way to increase your visibility at night is to get brighter lights, and more of them. Your Ducati’s stock lighting was designed to meet minimum Federal safety requirements that satisfies the manufacturing process. This leaves a lot of room for improvement in your sportbike’s lighting equipment.

You could replace your halogen bulb if it’s getting old and dim. However, if you’re looking for an improvement rather than a replacement, you also have the option of upgrading to an HID headlight or an LED headlight. Either option will give you improved visibility at night. In the case of an LED setup, you will also see a decreased load on your motorcycle’s electrical system, which is never a bad thing.

A light modulator system can be a good option for alerting fellow motorists in the daytime. But before you count on this as your one solution for nighttime visibility, be sure to find out if it is legal to use a light modulator at night.

Additional Lighting

If the rules of your local government allow, you could also consider mounting additional lighting on your bike. Auxiliary lights won’t necessarily make you more visible from the side or the back, but they can do wonders for your forward visibility. Marker lights can put some extra illumination all around the surface of the bike.

There are two main types of auxiliary lights: Fog lights and driving lights. They are anything but interchangeable, so to decide which is best for you, ask yourself what you want your headlights to do.

“Fog” lights have a wider dispersal pattern, which will help you identify side-of-the-road threats such as wildlife and the occasional late-night jogger. With a dispersal pattern of 35 degrees, they won’t focus light in a way that will extend the viewable road surface beyond the reach of your stock low beams.

“Driving” lights have a more focused dispersal pattern, so you can see further down the road ahead of you. Driving lights have a dispersal pattern of 20 degrees, so they are designed to “throw” the light down the road, helping to supplement the reach of your high beams. No matter which way you go, check your owner’s manual and battery specs to make sure it can handle the extra draw.

Marker lights can be placed on the sides and rear of your motorcycle, which can increase your visibility to motorists beside and behind you. Marker lights contain LEDs, so the extra power required to keep them lit should be a drop in the bucket for your overall power needs. Some sources suggest that creating face-like patterns will help improve your fellow motorists’ recognition. We can’t say whether that’s true or not, but it can’t really hurt — right?

Most states and countries allow these extra lights so long as their purpose is to protect the rider. But, again, check your local rules and regulations before adding them.

Keep Your Bike Clean

All of these fancy new headlights and reflective surfaces won’t shine as brightly if they are covered in a layer of dirt or mud. Keep your bike clean to keep it visible.

Apply Reflective Tape

Adding reflective tape to the boundary surfaces of your bike is a good way to increase your visible footprint. The top of your windscreen, saddle bags and wheels are excellent options for placing reflective tape. In addition to adding forward and rearward visibility, the rims and bags are perpendicular surfaces, so motorists approaching the intersection from your side will be able to see you cross their field of vision.

reflective tape increasing motorcycle visibility The reflective tape doesn’t have to be an eyesore in the daytime. You could get gray tape to blend into your rims, or you could get a color that complements the color of your bike. It won’t stand out during the daytime, but it will shine brightly in a car’s headlights at night.

The reflective tape doesn’t have to be an eyesore in the daytime. You could get gray tape to blend into your rims, or you could get a color that complements the color of your bike. It won’t stand out during the daytime, but it will shine brightly in a car’s headlights at night.

Be Mindful of Your Luggage

Saddlebags and top cases are handy for storing stuff, but they are generally black or some other dark tone. Obviously, black bags won’t contribute to your nighttime visibility. If you have the choice, look for bags in brighter colors or bags that have reflective elements built right into them. As a last resort, you should add reflective tape to the bags so they can help make you more visible.

You also want to make sure your bags aren’t actively detracting from your visibility. As you hang the bags on your motorcycle, take notice of whether or not they obstruct any existing lighting on your motorcycle. If they do, there is a decent chance they have been installed improperly.

Be Prepared and Carry a Flashlight

Heaven forbid, but if your bike breaks down, you want to make sure you aren’t sitting on the side of the road in the dark. If your issue is electrical, the bike’s lights aren’t going to be on. Then what? Have a flashlight on hand to help you fix your issue and let people see you when your bike’s lights aren’t functioning.

We aren’t talking about a single LED keychain flashlight, but rather the highest-rated flashlight you can fit into your on-board storage. Check it every few weeks to make sure it still works, and keep some extra batteries with it. Keeping a flashlight as a backup won’t do you any good if it doesn’t work, either.

Make Yourself More Visible

You have just about as much surface area as your motorcycle does, so even if you were to spray paint every exposed surface of your entire motorcycle with fluorescent paint, you’re still only reaching half of your visibility potential. Of course, we don’t recommend spray painting your motorcycle in any case.

We also don’t recommend dressing head to toe in black clothing for a nighttime ride. Making yourself more visible is just as effective as making your bike more visible.

Wear Reflective Gear

The options for reflective riding gear have exploded in the last few years. These days, if you want to be seen on your bike at night, you don’t even have to go full-on safety vest. There are plenty of fashionable options that include inconspicuous reflective accents and stripes. If you are concerned with how you look in your riding gear, you still have options that will help keep you safe at night.

Of course, you can find a safety vest that will fold up small enough to fit in your pocket if you prefer to go full stealth black during the daytime.

Helmet designers have also found creative ways to incorporate reflective colors and materials into attractive helmet designs. Whether it’s glow-in-the-dark paint or actual LED lights, your helmet can be an integral part of your visibility gear.

While on the subject of helmets, it’s worth noting that you don’t want to be using a tinted visor at night. Either install an adaptive visor or have a clear visor on hand to swap out, if necessary. Keep your visor clean, too, as dust, smudges and scratches will make it more difficult to see at night.

Don’t Ride Alone

group riding increases motorcycle visibility

What’s better than one bright headlight? Three, four or five bright headlights! Ride with a group if at all possible. With your headlights combined, your entire group will be easier to see. Safety in numbers!

Not only does this make it easier for other motorists to see you, but it will provide more coverage and brighter illumination of the road in front of you, so it will be easier for you to see what’s coming, as well.

Ride a More Vividly Colored Bike

A black bike looks awesome, but it’s next to impossible to see at night. We aren’t necessarily suggesting that you avoid dark plastics or accessories, but it’s something worth considering if you do a lot of night riding. If all things are equal and you have the opportunity to choose a brighter color, know that it will benefit you at night.

Be Proactive

Use your high beams, turn signals, and brake lights. A human’s brain is designed to be attuned to changes in the environment, so we tend to ignore the taillights ahead of us when they aren’t doing anything. Using your turn signals, brake lights and high beams helps to alert other drivers to your presence and your intentions. This may sound painfully obvious, but we mean to say that modulating your lights will make you more noticeable to your surrounding motorists, even on an unconscious level. It’s science!

Make sure you pay attention to your own surroundings. You alone are ultimately in charge of your personal safety. And while some dangerous situations are unavoidable, the best way to survive one is to avoid it in the first place. Stay out of other motorists’ blind spots, maintain a safe following distance and be mindful of your lane position. Don’t put yourself in a position to rely on someone else’s decision making skills.

Be Heard

This article is focused on being seen in the nighttime, but it’s worth mentioning how helpful it is to be heard. Adding lights to your motorcycle and riding down the road like a rolling carnival should be enough to catch the attention of your fellow motorists. But in the event that it isn’t, be prepared to make your presence heard. Just a quick note on establishing an auditory presence out on the roadway:

Don’t: Expect Loud Pipes to Help Make You Heard

This is counter-productive, dangerous and flat out untrue. The only people who can hear your loud pipes are behind you, and the vast majority of threats are going to come from the front. Ergo, loud pipes are just going to annoy people who already know you’re there. While we encourage you to improve your exhaust system and it’s sound, being loud doesn’t always lead to better awareness on the road.

Do: Think About a Horn Upgrade

You do still have options for beefing up your auditory presence in a helpful way, though. Motorcycle manufacturers don’t put a lot of design and manufacturing effort into finding the perfect horn. Consider swapping in one of several air horn alternatives. If you need to get someone’s attention and they can’t see you, they’ll definitely hear you.

Other Safe Riding Tips

increasing motorcycle visibility when riding at night

Slow Down

This goes hand in hand with the age-old advice to never drive faster than you can see. At night, you can’t see nearly as far, so it makes sense that you would want to go slower. Give your fellow motorists time to process you, and give yourself more time to process your surroundings.

Increase Following Distances

In general, if we’re out driving or riding past dark, it means we’ve been up all day. In addition to normal physiological reactions to darkness, the fatigue of simply being awake all day and into the night is enough to slow down our reaction times. So: Not only should you reduce your speed, but you should also increase your following distance. This gives everyone additional time to react should a dangerous situation develop.

Be Alert

All of this advice can be boiled down to two words: Be alert. Pay attention to the situation and know your limits. If you are getting tired, take a break to wake up — while keeping your bike’s lights on, of course.

Final Thoughts

Everyone will agree that nighttime riding is a risky endeavor, regardless of how well prepared you are. Many areas obviously feel the same way, since they forbid inexperienced riders on learner’s permits from riding after dark. Sleepy, distracted and potentially intoxicated drivers make your journey an unpredictable string of potentially dangerous encounters. That said, a little preparation will go a long way. So, too, will an extra ounce of focus and alertness on your part.

Modern motorcycles are meant to look cool in the daytime and comply with the minimum thresholds set by federal regulators. If you want to be safe at night, you’ll have to put in the effort ahead of time and make sure you employ the right gear.

If you’re looking for options to upgrade your Ducati’s lighting, browse our extensive selection of Ducati aftermarket lighting upgrades and add-ons. If you own an MV Agusta, don’t worry, we have you covered too. Contact our friendly, knowledgeable staff with any fitment questions or recommendations.

Also in News

Liquid error (line 245): internal
History of Ducati and Vintage Ducati Models

May 11, 2019 0 Comments

History of the Ducati Motorcycle

Discover the history of Ducati and what makes these motorcycles such an Italian icon today. From its inauspicious beginnings to its success on the track to some of the best bikes today...

Read More
Silverstone Design Corse Track Special feat. MV Agusta F3 800

April 10, 2019 0 Comments

It's the 4th of April, a Thursday like many others for most people but not for Design Corse.. This is our official start of the riding season and we have only one objective: having fun!...
Read More
The Best Motorcycle Levers to Upgrade Your Bike

April 07, 2019 0 Comments

The Best Motorcycle Lever Upgrades

To get the bike handling you crave, with braking and clutch control at your fingertips, swap out those stock levers and upgrade. New levers for your brake and clutch improve performance by customizing the most used portions of your bike to your preferences and physique

Read More

Item Successfully Added!

View Cart Continue