The perfect finishing touch for your Ducati bike are these stylish Ducati handlebar “Boing” bar ends. CNC racing bar ends are well-known as top-of-the-line when it comes to handlebar bar ends, and the CNC Ducati handlebar “Boing” bar ends are no exception.
Painstakingly made from solid alloy billets, these gracefully anodised bar ends add enough weight to the handlebars to minimize uncomfortable handlebar vibration. CNC racing Ducati handlebar “Boing” bar ends are gorgeously designed and come in four amazing colours to match your bike. Thanks to the recessed center and 12 drilled holes, these CNC racing bar ends are strong enough structurally to withstand a serious impact, but still lightweight enough to not add noticeable drag to your bike. The smooth, cylindrical design makes these bar ends a perfect match with protectors and crash bobbins.
You don’t need to worry that these racing bar ends aren’t right for your bike. These universal weights will fit any handlebar with a 14-18mm inner diameter and come with 13mm, 15mm and 17mm rubber expansion sleeves. These sleeves expand against your inner motorcycle handlebar tube for the perfect fit.
These handlebar bar ends will catch the attention of even other Ducati riders while they give you the comfort of knowing that the provided spacers protect your throttle control and levers from damage if you drop your motorcycle or low slide. The kit also includes a special spacer for free movement of the throttle control. Other, lower-quality bar ends can snag your throttle or bend even under low impact.
In the CNC Ducati handlebar “Boing” ends kit, you’ll find two weights and all the screws you need for assembly on all handlebars. You will need to remove any standard handguards before installing these ends.
Please note you will need the special adapters for the Panigale series!
Here we offer you the stunning MOTO CORSE "Spinner" rear axle protection sliders.
This version will slide directly through rear axle of your bike.
The kit consists of the unique spider Delrin plastic sprocket side protector and the exquisite CNC machined aluminium"Spinner" that is visible on the open wheel side of the rear.
This "Spinner" has a very clean aggressive look, perfect for the Ducati bikes, gives the bike a stunning look when moving and while stationary.
The Delrin plastic material is very strong giving you the necessary protection for you swingarm in case of an accidental drop or fall.
The sliders are held in place by an aluminium tie rod and two titanium screws.
Compatible with the following models:
Diavel (all models), Streetfighter 1098, 1098, 1198, Multistrada 1200, Panigale 1199/1199 S/1199 R, XDiavel
Here we offer the stunning MOTO CORSE axle protection sliders.
These will slide directly through the Rear axle of your bike.
Made from solid Delrin plastic, aluminium rod and fixed with titanium screws.
The Delrin plastic material is very strong giving you the necessary protection for you swingarm/forks in case of an accidental drop or fall.
The sliders are held in place by an aluminium tie rod and two titanium screws.
DIAVEL 1200 / XDIAVEL
PANIGALE 1199 / S /R
PANIGALE 1299 S/R
This is a special tool that can be very useful to anyone who wants to work on the rear wheel of their vehicle.
It is a specific tool with a profile that fits perfectly to the surface of the nut.
It has a central guide that makes it aligned with the wheel axle.
Can be used with a classic wrench or with a pneumatic wrench tool.
Compatible with the following models:
1098 / 1198 / STREETFIGHTER / DIAVEL / X / PANIGALE 1199 1299 959 / MONSTER 1200 / MTS 1200
CNC Racing have developed these stunning covers to fit all Panigale Ducati models.
Machined from a solid block of billet aluminum with the use of advanced CNC machines. These are rust resistant which will ensure years of long use and also are 40% lighter than the OEM cam caps material. These will perfectly fit over the OEM caps and come with three extended bolts.
Hard anodised in a great variety of colours. Don't forget to buy two cam caps, one for each cylinder of your powerful V-Twin engine!
CNC Racing cam covers will directly replace the OEM original version.
Please note you will need to remove the heat shield that covers the cams.
SBK 1199 Panigale 2012-14
SBK 1199 Panigale R 2013-17
SBK 1199 Panigale S 2012-14
SBK 1199 Panigale Superleggera 2014
SBK 1299 Panigale 2015-17
SBK 1299 Panigale S 2015-17
SBK 899 Panigale 2013-15
SBK 959 Panigale 2016-17
Our Tank Sliders are made from Carbon fibre reinforced with DuPont Kevlar, offering excellent crash protection and wear resistance.
Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
This is made in the U.K.
The application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
This Tank Slider (pair) kit is compatible with the Ducati 1199 Panigale (2012 onwards), Ducati 1299 Panigale (2015 onwards) and Ducati 899 Panigale (2013 onwards), Ducati 959 Panigale (2015 onwards)
For the pinnacle of protection, quality and design, add new Ducati front wheel axle sliders to your bike. These Ducati front wheel axle sliders will fit all the Ducati Diavel / 1199 1299 Panigale / 899 959 Panigale (front only) models.
If you’ve installed parts rear wheel axle sliders before, you’ll definitely want to add front wheel axle sliders to your bike as well.
Front wheel axle sliders are designed to protect the forks and the swingarm of your bike in case of an accidental spill creating unwanted impact to your bike. These front wheel axle sliders are made from high-quality, light billet aluminum and feature stiff, solid, plastic protectors. You can order them in a variety of colours, including red, black, silver and gold, to match your bike’s style. Just indicate your preference when ordering and we’ll be happy to accommodate you.
Our products are designed not just for function, but also for form, and these front wheel axle sliders not only do a great job of protecting your bike, but also look great and sporty as well, fitting right in with your bike’s natural sport aesthetic.
CNC Racing billet aluminium seat screw for the Panigale superbike that will replace the original. A lovely custom touch to your bike.
Please do not mistake this product with cheaper inferior coloured versions as ours are milled from pure aluminium and built to last under all demanding conditions.
Due to their tensile strength damaging screw threads or rounding off the head will be a thing of the past. Upgrade the overall spec of your high performance motorcycle with billet aluminium reliability.
Great colour variation.
This exceptional full exhaust system is the brain child of the Termignoni Racing Department team in Italy. Their main vision was to improve the performance and overall aesthetic look of the renowned Ducati Panigale.
The construction of the full system includes stainless steel pipes with exclusive titanium silencer end can sleeves, finished off with gloss carbon weaved end caps. Through each stage of the manufacturing process, each technician carefully does a quality control check from overseeing the automated welding process to the dyno testing of the exhaust systems. When it comes to aftermarket exhausts, no one comes close to Termignoni!
Included in the complete kit are two carbon heat shields that also match the carbon end silencer tips.
The design of the end can silencers are called "Force" for a reason. Taking data from the track, the racing teams from the likes of MotoGp have cooperated with design engineers to produce the most optimum back pressure for the full system. Then end results are as follows:
3.377 KG Weight reduction from OEM System
Increased Power (+4.6 Hp at 10,000 rpm) & +13,4 CV at 5,400 rpm
Increased Torque Output (+0.81 Nm at 10,000 rpm)
Don't forget to choose a Up Map Module to gain maximum performance with optimum power delivery and if needed the Up Map connection lead.
Please remember that the original license plate holder and passengers foot pegs , doesn’t fit with the Full Panigale System by Termignoni.
Fitment Instruction click HERE!
Panigale 1299 15+
Panigale 1299 S 15+
Panigale 1299 Anniversario
Panigale 1199 12-14
Panigale 1199 S
Panigale 1199 R
Panigale 1199 Tricolore
Panigale 1199 Superleggera
View full product details
Perfect substitutes for the original and alot stronger in Full Grade 5 Titanium.
M48 x 1,5 is made of titanium and constructed through the use of CNC machines.
This is a hard wearing and tough wheel nut from the sprocket side and is known to outlast any Aluminium versions on the market today.
1098 / 1098 S / 1098 R
1198 / 1198 S / 1198 R
These stunning fuel caps will replace the original cap with ease.
Adding great MOTO CORSE style to your bike.
These have a racing quick release system.
Beautiful design to compliment your bike complete with the MC logo machined onto it.
Made from light weight billet aluminium making these a much lighter alternative to the oem version.
Complete with the necessary seal and hardware for installation.
Available in 3 great colours: Black, Silver and Gold.
Will fit: All Ducati Diavels, all 696 796 1100 Monsters and the Panigale 899 1199 1299S.
Unique in their design and flawless in quality of finish.
These MOTO CORSE oil caps have become some of the most desirable accessories on the market today.
Beautiful caps are available in either lightweight aluminium or in natural titanium.
Surely make your Ducati stand out from the rest.
Will fit the Ducati range Listed:
PANIGALE 899 1199 / S /R
PANIGALE 1299 959 S / R
Ducati Panigale Parts
Launched as the most powerful twin-cylinder motorcycle in the sportbike world, the Ducati 1199 Panigale produces more horsepower from its 1199 cubic centimeters than many small cars. With handsome looks and exceptional handling characteristics to go with its phenomenal power plant, Ducati has firmly staked their claim as a world leader in two-wheeled performance with the Panigale.
Features such as a fully electronically adjustable suspension, load-bearing engine block and non-integrated exhaust system have laid the groundwork for the next generation of Ducati super sport bikes. As winner of the 2012 Le Mans 24-hour motorcycle endurance race, the 1199 Panigale has proven it belongs in competition at the highest level.
At Design Corse, our selection of Ducati Panigale parts come only from the Ducati factory itself and a small selection of the most trusted aftermarket manufacturers such as Bodis, FM and CNC Racing. Whether you’re looking to give your Panigale a unique appearance that will stand out on the road, extract even greater performance from this Italian thoroughbred or just repair a small issue before it turns into a big one, you’ll find what you’re looking for in our selection of Ducati Panigale parts.
A Great Selection of Ducati Panigale Parts
To make it easy to find exactly what you’re looking for, we’ve divided our selection of Ducati Panigale parts into easily searchable categories. These include:
With over 200 different Ducati Panigale parts available, you’ll have no trouble finding the replacement part you need. Our selection makes it easy to get all that’s necessary to take your bike to the next level or just make the small changes that give a motorcycle personality.
Whether you’ve owned many performance motorcycles or are just beginning your foray into two-wheeled performance with your Panigale, our team at Design Corse is here to help with expert advice. If, while browsing our selection of Ducati Panigale parts, you would like to know more, reach out to us today!