£28.47Add to Wishlist
The perfect finishing touch for your Ducati bike are these stylish Ducati handlebar “Boing” bar ends. CNC racing bar ends are well-known as top-of-the-line when it comes to handlebar bar ends, and the CNC Ducati handlebar “Boing” bar ends are no exception.
Painstakingly made from solid alloy billets, these gracefully anodised bar ends add enough weight to the handlebars to minimize uncomfortable handlebar vibration. CNC racing Ducati handlebar “Boing” bar ends are gorgeously designed and come in four amazing colours to match your bike. Thanks to the recessed center and 12 drilled holes, these CNC racing bar ends are strong enough structurally to withstand a serious impact, but still lightweight enough to not add noticeable drag to your bike. The smooth, cylindrical design makes these bar ends a perfect match with protectors and crash bobbins.
You don’t need to worry that these racing bar ends aren’t right for your bike. These universal weights will fit any handlebar with a 14-18mm inner diameter and come with 13mm, 15mm and 17mm rubber expansion sleeves. These sleeves expand against your inner motorcycle handlebar tube for the perfect fit.
These handlebar bar ends will catch the attention of even other Ducati riders while they give you the comfort of knowing that the provided spacers protect your throttle control and levers from damage if you drop your motorcycle or low slide. The kit also includes a special spacer for free movement of the throttle control. Other, lower-quality bar ends can snag your throttle or bend even under low impact.
In the CNC Ducati handlebar “Boing” ends kit, you’ll find two weights and all the screws you need for assembly on all handlebars. You will need to remove any standard handguards before installing these ends.
£21.90Add to Wishlist
Great billet aluminium part made to replace the original piece.
Lightweight material timing inspection covers, that are a great visual replacement for the OEM part.
Available in a different variety of great colours.
This Version has Laser CNC Racing Logo Beautifully placed for a clean simple design finish.
£21.90Add to Wishlist
This is a screw kit for Exhaust heat shield protection.
The kit is composed by three screw, made from a light alloy with subsequent surface anodized.
The screws replace the original iron often rusted or oxidized.
Original iron often rusted or oxidized are replaced by screws.
£69.35Add to Wishlist
The radiator covers protects the delicate components from impact with stones, animals or other road debris.
The mesh does not diminish the functionality of the radiator and only provides much needed protection on the 1098 SBK models.
It is fixed, according to the models, with screws and / or zip ties, provided as part of the kit.
No changes are necessary for the proper assembly of the radiator cap.
The set includes 2 pieces for Radiator and Oil Cooler.
£686.20Add to Wishlist
Made from high quality and light weight aluminium machined from a solid block.
These triple clamps are made directly for racing use with anti-chattering technology.
This particular version been used by ALTHEA Racing WSBK team sponsored by CNC Racing.
The triple clamps have been proven and reviewed by racing riders to improve stability and rigidity of the fork feel.
The kit is available for both SHOWA and OHLINS forks.
For anyone required a specific offset adjustment, the standard offset is at "0", with CNC Racing providing 4mm offset option (please see drop down menu).
The clamp hard anodised in black.
£327.77Add to Wishlist
CNC machined from a solid block of billet aluminium.
These stunning rearsets are perfect for superbikes, complementing its aggressive looks with CNC Racing sporting heritage.
Rearsets have folding footrests which are mounted on multiple positions.
The toe pegs have an eccentric rotary system which allows you to select the perfect riding position, depending on your height and riding style.
Complete with carbon fibre heel guards.
Ducati 848 EVO
Ducati 1098 S
Ducati 1098 R
Ducati 1198 S
£87.60Add to Wishlist
This is an adjustable license plate kit.
It includes a support plate, license plate light LED, supports arrows reflector..
This is a connection-specific model of motorcycle including nuts and bolts for quick and easy assembly.
Tilt adjustable thanks to a large-scale settings, you can change the angle of the plate.
The plate can be positioned at various points along its axis until the desired height is reached and measure.
Number plate light LED small approved.
The kit is for European plate size although other plates can also be fitted.
£14.60Add to Wishlist
These Ducati retainer spring caps are machined from solid aluminium alloy billets using the latest CNC machinery. Not only are they lighter than OEM caps, they come in various colours that can be matched with your motorcycle. These clutch retainer caps are anodised for a long lasting weather proof finish in all open dry clutch systems. Laser etched with the CNC Racing logo in white on each collar cap giving that extra touch. Being precision cut, you won't have any fitment issues. Designed with spherical top with 6 recessed dimples for a sporty reflective finish. The fantastic difference can't be seen until install with your motorcycle running. Perfect addition for the casual commuter or weekend track day warrior.
For the ultimate upgrade match these retainer caps with one of our premium CNC Racing open vented dry clutch covers also available in four vibrant colours.
This is a 6 Piece Kit for direct replacement of OE and Aftermarket Clutch systems that take six Allen bolts. Please note that this kit consists only of the retainer caps. Please check out our Ducati Dry Clutch Bolt Set also by CNC Racing which are also precisionaly cut and won't be easily chewed or thread damaged over OEM bolts.
Why not complete your performance and aesthetic with high performance clutch springs by CNC Racing
These caps are 4.3mm in Height.
£437.27Add to Wishlist
CNC machined from billet Aluminium to get the best lightweight and compact design.
Featuring the highest quality durable components to withstand most intense racing competitions.
The kit comes complete with carbon fiber heal guards and folding footpegs.
Features multiple adjustment points at the mountingplates, push rods, and at the toe pegs.
AVAILABLE IN RACE SHIFT ONLY!
Ducati 848 EVO
Ducati 1098 S
Ducati 1098 R
Ducati 1198 S
£32.12Add to Wishlist
These are precision machined from solid titanium GR 5 billets produced in house by CNC Racing. These handlebar riser clamp bolts are of extreme high quality hard wearing aerospace titanium. These are a direct replacement allen key head bolt for perfect fitment. Designed with a conical head for a neat flush finish and unique appearance via more light bounced off reflective titanium.
Please do not mistake this product with cheaper inferior coloured titanium versions as ours are milled from pure titanium and built to last under all demanding conditions. Due to their tensile strength damaging screw threads or rounding off the head will be a thing of the past. Upgrade the overall spec of your high performance motorcycle with titanium reliability.
Perfect addition for track day bikes or just the casual fair weather rider. These handlebar riser clamp bolts are highly corrosion resistant from the special curing process, preventing rust formation in a critical area of your bike. These bolts are incredibly lighter than original OEM steel bolts.
This kit contains 4 bolts.
StreetFighter 1098 S
£215.35Add to Wishlist
Stunning billet aluminium machined top triple clamp yoke.
These are beautifully made as a performance upgrade to your bike, through its light weight and rigid feel.
The yoke is a part of a CNC Racing triple clamp used in WSBK Carlos Checas bike, with anti-chattering technology applied.
Available only in anodised BLACK finish.
£283.97Add to Wishlist
Clutch Bell for Ducati interchangeable with the original and aftermarket models on the market. The peculiar characteristic of this new solution, built in lightweight and durable Aluminum combined and supplied to a series sintered or organic clutch discs, is that of presenting keying notches 12 of the semi-spherical disc, into the bell.
The disk pack is composed of:
9 discs steel wires, 2.5 mm thick and nr. 12 teeth, with sintered friction material
748 RACING (slipper) 1998-1999
748 RS (slipper) 2000-2001
851 all models from 1991 to 1992
888 all models from 1993 to 1995
888 SUPERBIKE ROAD 1994-1995
907 IE 1990-1993
996 RS (slipper) 2000-2001
998 RS (slipper) 2002-2003
999 RS (998cc) (slipper) 2004-2005
1098 R (1200 cc) 2008-2009
1098 BAYLISS (1200cc) 2009>
1198 R Corse (1200cc) 2010>
1198 SP (1200cc) 2011>
DESMOSEDICI 1000 RR 2008>
RACING (996cc) 916 (slipper) 1997-1998
CNC Racing is a big name in custom sport motorcycle aftermarket parts and accessories. If you don’t know them yet, you’ll be glad you’ve discovered them here.
At Design Corse, we work hard to find the best suppliers so you don’t have to search all over. You can simply browse our site and search for your make and model. We display all of the top quality parts you’re looking for.
One of the most popular and well-known brands we carry is CNC Racing. They design and manufacture their parts with your MV Agusta in mind. No generic, one-size-fits-all parts here. We’re talking custom, purpose-built MV Agusta covers, guards, trim pieces, performance components and hardware. Our catalog is too large to list it all here, so you’ll have to check it out for yourself to understand just how comprehensive it is!
Every MV Agusta enthusiast can find a custom upgrade for their bike here. We carry parts and accessories for the current MV Agusta lineup, and we also carry many components for the late-model bikes as well. You can easily perform a search according to your model, year and part type. We’ll display only the CNC Racing MV Agusta parts that interest you, and you get all the pictures and details you need to make your choice.
Of course we carry dozens of other parts designed to make your MV Agusta stand apart from the other models you meet. It’s exciting to be part of a legendary performance motorcycle family like MV Agusta, but that doesn’t mean you want to blend into the background. Get noticed with some CNC Racing upgrades.
When you install new parts and accessories on your MV Agusta, you want them to last. You also want them to be dependable and look good for the long haul. That’s why we don’t partner with just any aftermarket suppliers. We trust CNC Racing thanks to their years of experience, precision engineering and high-quality manufacturing.
The result is obvious when you hold a part like a CNC Racing clutch slave cylinder in your hands. The finish is impeccable, the dimensions perfect and the fitment as good as an original part from the manufacturer. Get started on your custom MV Agusta with a little help from your friends here at Design Corse and CNC Racing!