The perfect finishing touch for your Ducati bike are these stylish Ducati handlebar “Boing” bar ends. CNC racing bar ends are well-known as top-of-the-line when it comes to handlebar bar ends, and the CNC Ducati handlebar “Boing” bar ends are no exception.
Painstakingly made from solid alloy billets, these gracefully anodised bar ends add enough weight to the handlebars to minimize uncomfortable handlebar vibration. CNC racing Ducati handlebar “Boing” bar ends are gorgeously designed and come in four amazing colours to match your bike. Thanks to the recessed center and 12 drilled holes, these CNC racing bar ends are strong enough structurally to withstand a serious impact, but still lightweight enough to not add noticeable drag to your bike. The smooth, cylindrical design makes these bar ends a perfect match with protectors and crash bobbins.
You don’t need to worry that these racing bar ends aren’t right for your bike. These universal weights will fit any handlebar with a 14-18mm inner diameter and come with 13mm, 15mm and 17mm rubber expansion sleeves. These sleeves expand against your inner motorcycle handlebar tube for the perfect fit.
These handlebar bar ends will catch the attention of even other Ducati riders while they give you the comfort of knowing that the provided spacers protect your throttle control and levers from damage if you drop your motorcycle or low slide. The kit also includes a special spacer for free movement of the throttle control. Other, lower-quality bar ends can snag your throttle or bend even under low impact.
In the CNC Ducati handlebar “Boing” ends kit, you’ll find two weights and all the screws you need for assembly on all handlebars. You will need to remove any standard handguards before installing these ends.
Please note you will need the special adapters for the Panigale series!
The kit consists of two brackets that allow a greater range of adjustment than the supports standard footpegs with five different positions in the various directions for most efficient riding.
The two brackets are machined from solid aluminium alloy Anticorodal using CNC machines, with a surface finish obtained by anodic oxidation Black.
Beautifully designed with 1cm Increment adjustment in 5 diffrent positions to offer optimum precision shifting and comfort for Road or Track riders alike.
These Ducati retainer spring caps are machined from solid aluminium alloy billets using the latest CNC machinery. Not only are they lighter than OEM caps, they come in various colours that can be matched with your motorcycle. These clutch retainer caps are anodised for a long lasting weather proof finish in all open dry clutch systems. Laser etched with the CNC Racing logo in white on each collar cap giving that extra touch. Being precision cut, you won't have any fitment issues.
Designed with spherical top with 6 recessed dimples for a sporty reflective finish. The fantastic difference can't be seen until install with your motorcycle running. Perfect addition for the casual commuter or weekend track day warrior.
For the ultimate upgrade match these retainer caps with one of our premium CNC Racing open vented dry clutch covers also available in four vibrant colours.
This is a 6 Piece Kit for direct replacement of OE and Aftermarket Clutch systems that take six Allen bolts. Please note that this kit consists only of the retainer caps. Please check out our Ducati Dry Clutch Bolt Set also by CNC Racing which are also precision cut and won't be easily chewed or thread damaged over OEM bolts.
Why not complete your performance and aesthetic with high performance clutch springs by CNC Racing
These caps are 4.3mm in Height.
An absolute must have kit for anyone looking to protect the front forks in case of a drop.
These are very easy to install as they slide right into the front wheel axle.
Overall a great affordable kit that will save the looks of your precious bike.
R&G are known for their excellent racing protection parts with excellent rider feedback and reviews.
This kit is designed to enhance the functionality of the stock mirrors without compromising the original looks.
Made from engineering grade Acetal to ensure that not only does it provide superior strength but also blend in with the original material of the stock mirrors.
The Ducati mirror extenders improve the functionality of the OEM mirrors.
By moving the mirror out on a 2" (50mm) horizontal and vertical plane, the new position restores rider confidence by showing the road and not the rider.
3D machined for precision and installation couldn't be easier as the original wiring loom can be used without the need for cutting or soldering.
Sold as pairs and come with the usual Oberon Performance satisfaction guarantee.
Modified during 2012 to fit the current range with the addition of a wiring channel to make them backwards compatible.
Our Tank Sliders are made from Carbon fibre reinforced with DuPont Kevlar.
It offers excellent crash protection and wear resistance.
This is specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
It is made in the U.K.
Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.
This Tank Slider kit is compatible with the Ducati 848/1098/1198 (All years).
This is a screw kit for Exhaust heat shield protection.
Please do not mistake this product with cheaper inferior coloured versions as ours are milled from pure aluminium and built to last under all demanding conditions.
Due to their tensile strength damaging screw threads or rounding off the head will be a thing of the past. Upgrade the overall spec of your high performance motorcycle with billet aluminium reliability.
The kit is composed by three screw, made from a light alloy with subsequent surface anodized.
The screws replace the original iron often rusted or oxidized.
Original iron often rusted or oxidized are replaced by screws.
Streetfighter 1098 2009-14
Streetfighter 1098 S 2009-14
Streetfighter 848 2011-15
Ducati 1098 R
Ducati 1098 S
Ducati 1198 S
Ducati 848 08-10
Ducati 848 EVO
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly.
The unique R&G Tank Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control.
It enables the rider to maintain a stable body position while cornering and braking, whilst also relieving fatigue and providing the rider with complete confidence allowing him/her to fully focus on the road (or track) ahead instead of slipping and sliding on the tank.
Please note: R&G Tank Traction Grips now come with a 25mm diameter stick on emblem.
This Tank Traction Grip kit has been specially designed for the Ducati 848,1098 and 1198 models.
This is made in the UK.
Remove the mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!
Made from aluminium, these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds.
Comes supplied with bolts for installation.
This product is suitable for the Ducati 848, Ducati 1098 and Ducati 1198 (All Years)
The radiator covers protects the delicate components from impact with stones, animals or other road debris.
The mesh does not diminish the functionality of the radiator and only provides much needed protection on the 1098 SBK models.
It is fixed, according to the models, with screws and / or zip ties, provided as part of the kit.
No changes are necessary for the proper assembly of the radiator cap.
The set includes 2 pieces for Radiator and Oil Cooler.
This is available in a black or red finishes to fit the Ducati 848/1098 and 1198 ('07- onwards).
This 2 piece radiator & Oil Cooler guard is made from pressed aluminium and feature a neat, seamless frame (where applicable).
They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
R&G Radiator Guards are now available in a range of new exciting colour options.
No permanent modifications need to be made to the bike.
Perfect Quality unit - DOT & E-CODE certified to the highest European standards. It will not fog up or accumulate moisture.
Can be installed by anyone comfortable with basic tools and Power understanding.Picture shown is the actual item you will receive - Brand New & Perfect in every way!
Very aggressive light with BRIGHT LEDs and therefore - SAFE upgrade for your rear lighting!
2008+ DUCATI 848
2010+ DUCATI 848 EVO
2007 + DUCATI 1098 , 1098R , 1098S, 1198
This is a complete unit for easy replacement.Road legal Tail light with e-mark .
This SMOKED LED Tail light fits for Ducati 848/1098/1198 Plug and Play connector.