Part No: 306132
Used in the Italian Superbike Championships on the track by the infamous Matteo Baiocco under the Motocorsa Racing Team. This special edition racing full system has even been featured in the Italian Superbike magazine "Moto Sprint".
Being used on the track this system isn't homologated for road use and has no DB killers. This allows the system to fully utilise the raw power of your Ducati Panigale as it was intended on the race track with no side stand provisions or radiator cooling fans. The noise level is 114 db at 8000 rpm and a spectacular power increase of 20 BHP!
The full system is made from stainless steel in a 2 into 2 asymmetric configuration. The end can slip ons are made from Titanium. The diameter of the pipes are 60mm in width allowing for the most optimum gases flow rate. The design has enabled the rider with this system to fully use their suspension without their tail end hitting the pipes or obstructing the rear sprocket set up.
Each full system is made by hand to make sure every part meets the standards of racing bodies world wide. The quality control inspection process is very stringent and precise. The total weight of this full system is just 6kg!
This system will require your ECU to be specially remapped or one offered by FM Projects specifically for this exhaust race Kit. Also we can provide a fiberglass belly pan that will sit close to the sump than the OEM belly pan fairings which are made for the under engine OEM exhaust system at an extra cost. Also don't forget to ask for the performance air filter to squeeze out every drop of usable power and torque!
Panigale 1299 15+
Panigale 1299 S 15+
Panigale 1299 Anniversario
Panigale 1199 12-14
Panigale 1199 S
Panigale 1199 R
Panigale 1199 Tricolore
Panigale 1199 Superleggera