MAKE: MV AGUSTA
Part No: 302210
This is a Titanium frame bolt set for MV Agusta F4 and Brutale second generation motorcycles. These are the critical bolts which join the subframe (where you sit) onto the main chassis on the motorcycle. Moto Corse titanium bolts look better than the factory bolts, weigh less, and stiffen up the frame all at the same time.
Your MV's "frame" is actually two frames bolted together. The main frame is located at the front of the bike and holds the engine, footpegs, and the steering stem. The part you sit on, however, is a different part altogether: the subframe. The seat mounts to the subframe, which is a separate part that bolts to the main frame in four places. That's where these bolts come in. These are the critical bolts which join the subframe to the main frame on your MV.
Moto Corse Titanium subframe bolt kit includes four Titanium bolts. This kit will not only save the weight of approximately 30% and eliminate corrosion, but it will also slightly stiffen the frame of the motorcycle by more effectively tying together the subframe and the main frame. These aviation grade 6AL-4V bolts are stronger than the OEM "hardware store" grade steel bolts.
The head of the screws are characterized by the Drilled Billet style, hallmark of Motocorse.
Note that some other shops also sell "Titanium subframe bolts". Don't confuse those with our top-quality kit. Our bolts and nuts are made to NAS "X" grade close-specification Aerospace standards. This kit is 100% titanium, even down to the locking element in the locknuts.
Machined from billet and carefully hand finished like fine jewellery . These items need to be seen and handled to appreciate their quality. Speed jewellery aptly sums it up with all Moto Corse products. These bolts install easily with simple hand tools.
Brutale 1090 / R / RR / Corsa 2013-15
Brutale 920 / 990R / 1090 R / 1090 RR 2010-11
F4 1000 / R 2013-15
F4 1000 RR 2013-15
F4 1000 S / R / RR 2010-12