MAKE: MV AGUSTA
Part No: 303236
Our Hub was designed and Produced out of the need for a Much stronger more rigid while offering flex, better designed and finished than the OEM and other aftermarket Rear Hubs.
Our engineers worked with structure of the metal to keep weight down as much as physically possible without weakening the construction of the Hub Itself so it retains its integrity.
We have Used AVIONAL Alloy instead of 7025 Ergal due to the fact that AVIONAL has almost the same tenacity of 7075 but it offers more flex in the metal itself where as 7025 has possibility of cracking under different conditions and Loads and is not the best solution for construction of a rear Hub.
Torque pressures of our hub are also significantly increased from the OEM version due to the construction and metal therefore any over tightening of the pinch bolts to around 40 nm will not damage the outer races of the internal bearings used.
CNC machining AVIONAL is also used in the construction of supercars components such as the PAGANI and the quality speaks for itself.
Our Hub comes complete with 1 updated needle Bearing on the sprocket side with Uprated Dual Sealed bearing setup on wheel side which has been known to work perfectly in the 675 800 Upgraded hubs.
Service and Maintenance intervals are retained same as the Original schedule to keep the hub running at its optimum, Please remember to grease the original axle prior to installation with a compatible grease.
Original 675 800 Hub Weight: 1.10KG
Design Corse Upgraded Hub Kit: 1.25KG
PLEASE NOTE THIS IS A COMPLETE DIRECT REPLACEMENT KIT WITH NO MODIFICATIONS!
F3 675 800 / RR / RC
Brutale 675 800 / RR
Dragster 800 / RR