Dispatch Approx. 1 - 3 Business Days.
These items are in stock and can be ordered immediately from our store. Dispatch time 1-3 business days.
Dispatch Approx. 2 - 7 Business Days.
These items are in stock at the Manufacturers warehouse but in limited quantity. Dispatch Time 2-7 business.
Dispatch Approx. 10 - 12 Business Days.
These items are in stock at the Manufacturers warehouse but in limited quantity. Dispatch Time 10-12 business.
Pre order - Dispatch Approx. 4 - 5 Weeks.
These items are sold out or special order products that may be made to order but can be ordered immediately within our store. Dispatch time 4 - 5 weeks from times order placed.
Built Using CNC Billet Aluminium and made to the highest Standard.
This water pump has the purpose to increase the re-circulation of coolant by 46% within the inside of the motorcycle.
The original water pump and below 4700 RPM, the pump has a very slow re-circulation speed which is caused by the large gap between the rotor and the pump cover.
The result of this is a huge inconvenience to the performance and comfort for anyone who uses their MV Agusta bike everyday or as a traditional Sunday Rider.
For example during the summer you only need to be stuck in a traffic jam or to stop at a traffic light to cause the temperature to rise to 115-117 degrees. To then bring the temperature back down to 90 degrees requires several kilometres of sustained speed riding which above all is not always possible (especially in city conditions).
Enlarged water pump has been developed with the help of several important Italian teams who use the 312 RR in race conditions. It is possible to fit the pump on all MV Agusta motorcycles whether it be the Brutale or the F4. The unit is made from 7075 T6 aluminium which has been CNC machined.
All the normal fixings, bearings, outer o'ring seal and the shaft can be purchased as original official spare parts from any MV Agusta dealer and in this way you will have peace of mind that all of the parts which work with the engine are completely safe and compatible.
This Unit is a complete water pump including the housing, Shaft, bearings and Impeller, Original rear of pump to engine casing gasket and fluid drain bolt must be used.
No modifications needed as its a straight fit.